Вернуться   Форум Pilot Engineering > Поиск по форуму

Показано с 1 по 17 из 17.
На поиск затрачено 0.00 сек.
Поиск: Сообщения от: Pin
Раздел: Pilot VAF/MAF converter 14.10.2016, 16:53
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan Sorry for very long delay with answer....

Hi Rohan
Sorry for very long delay with answer.
Will wait your test on itbs.

Look here what folks from CIS countries do with VFM when they couldnt buy new or remanufactured: ...
Раздел: Pilot VAF/MAF converter 15.09.2016, 23:36
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan. Sorry for delay with answer. I...

Hi Rohan.
Sorry for delay with answer.
I have a good news - your PCB was repaired.
It was killed by static.
I had replaced USB interface and DAC.
Will send it back to you at saturday or...
Раздел: Pilot VAF/MAF converter 26.08.2016, 10:39
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan. Never installed it on itb. So...

Hi Rohan.
Never installed it on itb.
So before someone install it and make log, i couldn't tell anything.

We thinking about developing new PCB( converter+ contactless sensor), which could be...
Раздел: Pilot VAF/MAF converter 24.08.2016, 10:27
Ответов: 35
Просмотров: 14,787
Автор Pin
Got the log. It seems that all ok.

Got the log.
It seems that all ok.
Раздел: Pilot VAF/MAF converter 20.08.2016, 11:18
Ответов: 35
Просмотров: 14,787
Автор Pin
At first look the table is not bad but i can say...

At first look the table is not bad but i can say nothing without power mode log file.

Please make power mode log - drive vehicle at 2-nd gear at 1500 rpm, depress fully accelerator and wait for ...
Раздел: Pilot VAF/MAF converter 20.08.2016, 11:08
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan. First points need to be tuned at...

Hi Rohan.

First points need to be tuned at neutral with "end interpolation" turned on.
This will give you some table, which provides you to drive vehicle under load and tune other points under...
Раздел: Pilot VAF/MAF converter 05.07.2016, 11:45
Ответов: 35
Просмотров: 14,787
Автор Pin
Hello Rohan The main function of ic 2904 is...

Hello Rohan

The main function of ic 2904 is to protect other components from overvoltage and static. It works as buffer.
The reason of it's death in most cases is static, or wrong connection....
Раздел: Pilot VAF/MAF converter 03.07.2016, 23:20
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan. Sorry, but it seems , that i didn't...

Hi Rohan.
Sorry, but it seems , that i didn't understood you in this message (http://forum.pilotpowersupply.com/showpost.php?p=7772&postcount=18)

You checked voltages on first picture...
Раздел: Pilot VAF/MAF converter 03.07.2016, 15:13
Ответов: 35
Просмотров: 14,787
Автор Pin
No. it is ok. Now please check next...

No.

it is ok.

Now please check next points and let me know a results
2027
Раздел: Pilot VAF/MAF converter 03.07.2016, 14:29
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan Is converter's output shutt off after...

Hi Rohan
Is converter's output shutt off after firmware upgrade or before it?

Please check next voltages between ground and control points 1-7
with a same table test.tab
2026
Let me know a...
Раздел: Pilot VAF/MAF converter 03.07.2016, 11:42
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan It is ok to take it from VAF :) ...

Hi Rohan

It is ok to take it from VAF :)


Please install jumper to motronic position (1-2) (http://max.pilotpowersupply.com/wp-content/uploads/2011/06/pilotEN.jpg) and check voltage with a...
Раздел: Pilot VAF/MAF converter 03.07.2016, 10:25
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan It is bosch hfm5 and it needs ref...

Hi Rohan

It is bosch hfm5 and it needs ref 5V.
You can get it from 2-nd pin of service connector of the converter or from throttle position sensor ref pin.


Dont worry, let me know whats...
Раздел: Pilot VAF/MAF converter 02.07.2016, 12:43
Ответов: 35
Просмотров: 14,787
Автор Pin
Hello Rohan Is it bosch hfm5 maf (e46)? Can...

Hello Rohan
Is it bosch hfm5 maf (e46)?
Can you give me part# of it? or make photo?

You can connect ref voltage to the converter input and install jumper to jetronic mode ( external reference...
Раздел: Pilot VAF/MAF converter 28.06.2016, 12:01
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan When you turn off ignition ,...

Hi Rohan

When you turn off ignition , converter and bluetooth also turns off, and windows lose bluetooth connection. That is why you need to restart or choose com port again.
We working on ...
Раздел: Pilot VAF/MAF converter 18.06.2016, 00:25
Ответов: 35
Просмотров: 14,787
Автор Pin
The most simple way is to solder HC-06 to the...

The most simple way is to solder HC-06 to the converter with a pieces of wires to the next points (this points are also marked at the bottom side of PCB HC-06)
2006

A little bit harder way you...
Раздел: Pilot VAF/MAF converter 09.06.2016, 10:49
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi Rohan 50V is too high voltage. It is good...

Hi Rohan
50V is too high voltage. It is good that you decided not to connect it.

About USB problem. Is there only connection problem or pcb also doesnt convert signal ?
If there only USB ...
Раздел: Pilot VAF/MAF converter 15.02.2016, 11:25
Ответов: 35
Просмотров: 14,787
Автор Pin
Hi. A and B inputs is using with old Hall or ...

Hi. A and B inputs is using with old Hall or inductive sensors, whitch was installed in ignition distributors in old car.
Most users tipycaly dont use this inputs. In the future there will be...
Показано с 1 по 17 из 17.

 
Быстрый переход

Часовой пояс GMT +6, время: 04:47.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot