Показать сообщение отдельно
Старый 19.06.2021, 21:44   #5
Регистрация: 22.03.2021
Сообщений: 13
jcf на пути к лучшему
По умолчанию

Hi Pin, I followed your advice and connected my VAF through the converter.
Here you will find 2 screenshots of the software connected to the converter (I made the engine run from idle to 5000 rpm. I didn't made any roadtest but have the feeling the engine runs already smoother - the AFR gauge I have on the dashboard shows a more tuned mix, as the original setup seems to be very often lean) :
- conversion table : https://www.dropbox.com/s/33mcx8w8cz...00.20.png?dl=0
- log graph :

Here you will find the log :https://www.dropbox.com/s/rly0kfx0ln...01_20.log?dl=0

and here the tab :

Now I'll try to fit the MAF, I bought the Siemens you recommend because I couldn't find the diagrams for the Passat one I already had.
jcf вне форума   Ответить с цитированием