Тема: M42b21 bmw
Показать сообщение отдельно
Старый 15.09.2016, 23:36   #34
Pin
Супер-модератор
 
Аватар для Pin
 
Регистрация: 08.09.2009
Сообщений: 3,079
Pin на пути к лучшему
По умолчанию

Hi Rohan.
Sorry for delay with answer.
I have a good news - your PCB was repaired.
It was killed by static.
I had replaced USB interface and DAC.
Will send it back to you at saturday or monday

About itbs - just need to try. We have not vehicle with itbs.
So if you or some of your friends have one, you can try on it your repaired PCB when you will get it and make some logs.

About immortal vfm- it doesn't matter that it is not tuned correctly.
First of all we need full opening at maximum load, to get full range of DAC 0-255 points. We can tune full opening by tuning it's spring tension manually.
And second-software will automatically tune characteristics as it work when you replace vaf to maf.
This is not copying vaf's signal.
This is adding to vaf contactless angle position sensor. Say with unknown output voltage-angle. And tuning it same as you tuned MAF.
Converter will be the same

Regards
Pin вне форума   Ответить с цитированием