Показать сообщение отдельно
Старый 15.07.2021, 13:00   #13
Pin
Супер-модератор
 
Аватар для Pin
 
Регистрация: 08.09.2009
Сообщений: 2,976
Pin на пути к лучшему
По умолчанию

Hi JFC,
Sorry for delay with answer - i was on vacation out of city, and there was a very bad internet.

As I see on last log , the signal of the MAF input does not changes.
If you press accelarator and MAF's signal is not rising, then something connected wrong or new airflowmeter is not working.

Try to remove airflowmeter from intake, start logging and blow air into it with your mouth and check if the red square( regime point) moves ont he dashboard or not.
If it the red square doesent move - then something wrong with a wiring or airflowmeter is bad.
Pin вне форума   Ответить с цитированием