Вернуться   Форум Pilot Engineering > English forum > Click here :) > Pilot VAF/MAF converter

 
 
Опции темы Опции просмотра
Старый 10.08.2018, 18:24   #1
christian_piasini
Пользователь
 
Регистрация: 11.05.2018
Сообщений: 5
christian_piasini на пути к лучшему
По умолчанию Project on Jectronic Alfa Romeo 1.8 Turbo

Hello everybody on the forum.

I have a question about the RPM input signal connection on the pilot PCB board, and also about the configuration.


alfa romeo 75 use bosch distributor HALL with 4 windows @ 720 cranckshaft degree.

i saw that older verion USB pilot PCB board has 3 pad on the board to connect the rpm signal, i want know if the same pads on the Bluetooth pilot are possibile to use.

i saw that don't have from factory the pins to connect but need soldering.

just want be sure before connect on it.

thanks to everybody

Best regards

Christian Piasini
christian_piasini вне форума   Ответить с цитированием
 

Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход


Часовой пояс GMT +6, время: 03:07.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot