25.04.2021, 16:29 | #1 |
Пользователь
Регистрация: 22.03.2021
Сообщений: 13
|
VAF to MAF conversion on a VW T3 DJ WasserBoxer Vanagon
Hello Everybody,
I'm planning the installation of my converter on my T3, but have several questions because I'm unsure about my right understanding of the instructions. First I understand that the lambda is mandatory for the first setup, but mine is badly placed in my opinion. I put it in the silencer (I soldered it by myself, there is no OEM place for a lambda in this exhaust, my lambda only serves for a dashboard gauge, since my ECU (Dijijet) doesn't take this information into account), so its signal is not very accurate I think (it goes regularly from very lean to very rich, but rarely between both, but maybe it's because of a worn VAF...).
Second, I have questions about the wiring.
I have made a draft of the wiring plan which you can find here if needed for verification and comments => https://www.dropbox.com/s/wqn86sofvr...p1%29.pdf?dl=0 Thank you very much in advance for your help and have a nice Sunday ;-) Jean-Christophe |